2.4GHzPWMタッチRGBLEDストリップモジュールコントローラー調光器キット

PWM touch RGB LED strip module controller dimmer kit

Model: FUT025
For constant voltage type RGB LED module, 柔軟なLEDストリップ, edge-lit high power RGB EH1-WSx-RGB series LED module.

前書き:

This PWM touch RGB LED strip module controller dimmer system is a high-performance RGB led touch remote controller, adopting the most advanced PWM control technology, controlling all RGB led products with four lines and three circuits( 線形照明), owning 640 thousand colors and 20 automatical changing modes to choose.

Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in led RGB strip light, led module and so on.

With the technology of the 2.4G Hz high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability，high speed telecommunications, etc.

The remote looks fashionable and elegant，with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use.

The modular design and easy screwed terminals enable the controller easy to match with all kinds of led light products.

特徴:
– Small size
– Good materails, good looking and hand touch feeling
– まで 30 meters remote control distance
– Two channels output
– Control signal can go through glass, walls, etc.

Technical Parameters:

Product Features:

Picture Demonstration:

We also have single color brightness dimmer kits available, please click the link to know more–LED調光器 & Controller.

The PWM touch RGB LED strip module controller dimmer is MiBoxer brand,

You can also check more option on their website–www.futlight.com.

マニュアル:

Function of Keys

Program List

Code matching:

For a new kit ( remote & controller), the remote can work only when it is programmed to the controller.

Please follow the below instructions:
Confirm it is correctly connected between power supply, LED controller and LED load.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment you see the light is on. The LED light blinks twice slowly when it is done.

Code clearing:

The code can be cleared as needed.
The kit (remote and controller) will stay in the original state after code clearing, and it can work again when code rematching is done.
Please follow the below instructions:
Confirm it is correctly connected between power supply, LED controller and LED load.
Switch off the power, then switch on again, and long press key 5(within 3 seconds) the moment you see the light is on. The LED light blinks nine times slowly when it is done.

Attention:

1. The regular product for sale is a kit (remote and controller).
The user can re-programme freely as needed. One remote can control countless controllers, but one controller can only be controlled by four remotes (マックス).
2. Please check the battery installation and controller (totally discharge the power), when you programme after switching off and switching on.

Connection diagram

Attention

1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be damaged.

2. Please don't connect wires with power on.
Please switch on again only when it is in right connection and no short circuit.

3. Please keep your hand off the touch ring when installing the batteries, to improve its sensitivity,and use the remote(3 seconds later) after the batteries are installed.
Please reinstall the batteries, if the touch ring is found low-sensitivity.

4. Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Installation & 配線:

PWM touch RGB LED strip module controller dimmer kit,

Can work with constant voltage type RGB LED module, LED strip,

Also our edgelit high power RGB LED module EH1-WSx-RGB series, with connection as below:

- 頭に接続された調光器:

上記の接続手順は参照用です, 特定のLED製品用, 最終版についてはお問い合わせください.