12W Osram backlit rigid LED module bar quick connector

  • Description
  • More
  • Inquiry

1 meter 12W Osram backlit rigid LED module bar, quick connector with puncture terminals



Osram backlit rigid LED module bar, is designed as back lighting source, mainly used in single sided backlit lightbox, signs, and stretch ceiling, especially for large size ones.

Optical wide angle lens, providing soft, big area and uniform illumination for the lightbox and signs.



– Use Osram 2835/3030 high power LEDs, 1W each LED, >100LM/W

– With 170 degrees high quality optical lens, good spread out lighting effect

– With wire puncture type terminals, easy and flexible connection, no more complicated wiring

– Cost saving, for light box with 50-200mm thickness, only need 10-12pcs LED strips each 1 m2

– Can use screws or adhesive tape for installation

– LED strip length and wattage can be customized

– Can do other customization according to different applications and requirements

– 5 years warranty



– Backlit lightbox, especially large size ones

– Backlit stretch ceiling

– Other backlit applications



Product Specifications
PowerMax 12 WLED Type & Quantity12pcs 2835
Item NumberEH2-WS12P-OSRLED Chip BrandsOsram
Dimension944*16*9 mmIP RateIP40
Cuttableevery 2 LEDs(158mm)LED Distance80 mm
Warranty5 yearsCertificatesCE, RoHS
CableNot included
ApplicationFor large size backlit lightbox signs, stretch ceiling, or other back lighting applications
Electrical & Optical Parameters
Working VoltageDC 24VBeam Angle170 degrees
Lumen Output1200-1300 LMColor Temperature2700-7000K
CRI>80 RaConnectionconnected in parallel
Lighting Areaonly need 10-12pcs each one square meter
Application DataFor backlit, single sided lightbox thickness: >50mm   Length: unlimited   Width: unlimited


More Options:

We’ve developed full range of the backlit rigid LED module bar, different wattage, different size, different lens.

You are always welcomed to tell us ideas or requirements, we will provide the right solution and product accordingly.

Check more backlit LED products for lightbox signs by clicking this link–Backlit LED for lightbox.


1. Dimension drawing:

12w osram wide angle lens backlit rigid led bar puncture terminals for lightbox signs 5 ritop lighting


2. Connection & Wiring:

1. Just choose any "+" and "-" terminals of one LED strip, connect to driver, very convenient and flexible.

2. Distance between two LED strips can be adjustable according to different light box thickness.

3. The length of each LED strip can be different.

4. Make sure to choose the right diameter of wire, according to different quantity of LED strips connected.

wide angle lens backlit rigid led stripe with puncture terminals connection detail ritop lighting

Δ Once the cap is put on terminal, is recommended not remove it.

    If have to, should be very careful when remove the cap, puncture terminals may be damaged.


wide angle lens backlit rigid led stripe with puncture terminals wiring 1 ritop lighting

wide angle lens backlit rigid led stripe with puncture terminals wiring 2 ritop lighting


3. Applications:

wide angle lens backlit rigid led stripe with puncture terminals application ritop lighting